![]() |
|
|
|
#1
|
||||
|
||||
Removing Carpet from Console??
Hey guys,
Has anyone had any success swapping out the carpet sections that are attached to the center console on their car? I see them for sale separately all the time, but after gentle messing with mine a bit, I can't see how you would ever get it back together & looking very good... Mine could use to have the carpets changed out, but I don't want to ruin the console either...
__________________
Currently: 1972 350SL Euro 4spd 1973 BMW R75/5 1981 BMW R80GS 1995 FZJ80 with OM606 Conversion In Progress |
#2
|
||||
|
||||
Instructions (W124)
Self Made Tool
[And one screw on each side]
__________________
'84 300SD sold 124.128 |
#3
|
||||
|
||||
Hmm... Very interesting.
Mine seem to be glued in, both to the vinyl console (with a black adhesive) and to the foam rubber backing. I'll have to take a closer look on my mostly destroyed spare to see about these clips...
__________________
Currently: 1972 350SL Euro 4spd 1973 BMW R75/5 1981 BMW R80GS 1995 FZJ80 with OM606 Conversion In Progress |
#4
|
||||
|
||||
There are no clips. Just cut old carpet out carefully with a sharp knife. Then insert new carpets in the pocket that remains. Make sure new carpets are same shape as old ones. Did it on my 350SL
__________________
Graham 85 300D ![]() |
#5
|
||||
|
||||
This worked well with a combination of a VERY sharp knife & some patience.
Only problem with the old carpets was that that black "tape" that they used to hold them in had turned to tar in my '72. I got it to work, but it left a a bit of a black stain on the the top edge by the console on one side: ![]()
__________________
Currently: 1972 350SL Euro 4spd 1973 BMW R75/5 1981 BMW R80GS 1995 FZJ80 with OM606 Conversion In Progress |
![]() |
Bookmarks |
|
|