Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-06-2004, 09:40 PM
Left Coast, Right Brain
 
Join Date: Feb 2003
Location: Seattle
Posts: 201
'94 E420-Starting Issues

Greetings-

I'm having some "issues" with my E420.

In mid-July while driving home from work it started showing odd dash light combinations and died at an intersection and I had it towed to a local shop with a descent rep that specializes in German autos.

I had strong battery but no crank at all. The shop went over it and you’ve gotta love it when the mechanic says, “I’ve never seen this before”. They found no power to starter and a fuse #5 was cracked. Replaced the fuse, but still no crank.

They removed instrument cluster and front lower interior panels and steering lock assembly to test ignition switch. Found voltage at ignition switch in Position 50. They found the starter lock out switch smelling burnt and not operating. They then tested the starter lock out circuit and found the ground feed to the lock out relay from control unit “not there”. They then traced the wire to connector X35-7 and repaired the connection at X35-7. Bingo, starter then worked. About $600 US.

That’s 7 weeks and about 1000 miles ago. Friday I come home from work, do some chores and later head for the grocery store. Go to the 420 and no crank. I diddle around with the selector, roll the car back in gear, nothing works. Saturday morning I go, “WTF let’s give it a shot.” Fires right up.

Today I take the car on a drive to one of my daughter’s soccer tournaments north of Seattle. Everything’s fine until we pull off I-5 to get the kid some food and come out of the gas station/food stop and – no crank. I go through the stuff I did Friday night and again, nothing. I’ve shut down radio, A/C, etc. Finally “one last time” and it fires up.

Drove straight home without shutting ‘er down.

Starter lock out? Should I make this shop cover the labor on this? Thoughts?

Thanks
__________________
KyGuy
'04 E500 Brilliant Silver/Ash (50K)
'01 ML320 Desert Silver/Parchment (67K)
'99 C230 Kompressor Black/Black (62K)
'93 Mitsubishi Montero (134K)(Home Depot Express)


'70 6.3 Gold/Tobacco (128K) (sold and now in Germany)
'94 E420 Silver/Blue (80K) - Sold
'97 E320 PearlBlack/Parchment (77K) - Sold
'66 300SE Coupe (owned 2002-2003)
Reply With Quote
  #2  
Old 09-06-2004, 09:44 PM
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Did you try "N" ???????
Reply With Quote
  #3  
Old 09-06-2004, 09:46 PM
Left Coast, Right Brain
 
Join Date: Feb 2003
Location: Seattle
Posts: 201
Yes. Wiggled the selector in both N and P. In both cases it eventually started in "P".
__________________
KyGuy
'04 E500 Brilliant Silver/Ash (50K)
'01 ML320 Desert Silver/Parchment (67K)
'99 C230 Kompressor Black/Black (62K)
'93 Mitsubishi Montero (134K)(Home Depot Express)


'70 6.3 Gold/Tobacco (128K) (sold and now in Germany)
'94 E420 Silver/Blue (80K) - Sold
'97 E320 PearlBlack/Parchment (77K) - Sold
'66 300SE Coupe (owned 2002-2003)
Reply With Quote
  #4  
Old 09-06-2004, 09:49 PM
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Back up lamps work??
Reply With Quote
  #5  
Old 09-06-2004, 10:31 PM
Left Coast, Right Brain
 
Join Date: Feb 2003
Location: Seattle
Posts: 201
Car, of course, started right up and back up lights worked with selector in "R".
__________________
KyGuy
'04 E500 Brilliant Silver/Ash (50K)
'01 ML320 Desert Silver/Parchment (67K)
'99 C230 Kompressor Black/Black (62K)
'93 Mitsubishi Montero (134K)(Home Depot Express)


'70 6.3 Gold/Tobacco (128K) (sold and now in Germany)
'94 E420 Silver/Blue (80K) - Sold
'97 E320 PearlBlack/Parchment (77K) - Sold
'66 300SE Coupe (owned 2002-2003)
Reply With Quote
  #6  
Old 09-06-2004, 11:12 PM
Registered User
 
Join Date: Jan 2002
Location: NY
Posts: 500
Check ground cable from the car body to the engine - it maybe loose or corroded.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page