![]() |
|
|
|
#1
|
||||
|
||||
![]()
I have a problem with the passenger side power seat in my us spec 87 190E 2.6... the seatback would only recline and not come forward.... then with a lot of percistence (I held the switch forward for like 30 sec) it finally mouved forward, and now wouldn't recline !? then the switch started smoking (@#^$$&@@$#!!!), and it would not go either way.... the next day i tried it and now it only reclines again... the rest of the chair functions (tilt, moving forward/ reverse) work fine... any thoughts about this... is it the switch, or the chair motor? how do you remove the switch t examine it?
__________________
95 M3 (US) 94 318is (EURO) 87 190E 2.6 |
#2
|
|||
|
|||
Pull all the buttons off first then you can remove the face. Behind it are two screws, then the switch will come out. I recommend not taking the switch apart as the ball bearing go everywhere and it is a ***** to put back together.
__________________
~Jamie _________________ 2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's. 1986 190E 2.3 Black, Auto, Mods to come soon..... |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|