88 190E 2.3 Vacuum Line Woes

[srogers312]

Hi All,

I am having serious trouble trying to figure out where all my vacuum lines go now that i have reassembled my engine. I have a picture of where two of them come from. I am trying to located where the two that come from under the throttle body go. I am also trying to figure out what vacuum lines hook up to the thermo vacuum sensor on the block. I have had some people tell me that one of them hooks up to the distributor, but i dont have any valves on the distributor. Despite my lack of hooking these wires up, the car starts ok when its cold and runs ok once its found its idle. However, when the car has already been heated up it has a hard time finding idle unless you hold the accelerator down for a bit.

Thanks for the help,
-- Steven