|
|
|
#1
|
|||
|
|||
Everytime i ask a mechanic?
I ve been looking at getting an e420 on erealson is because i ve heard such good reviews from the audience here on mercedesshop. The only problem is when i go to some mechanic shop , i get alot of negative opinons about the V8 vs the e320 v6, i hear the the v6 2.6 e320 is a less troblesome engine and its more durable, too. Im confused a bit about the integrity of some of the motors thats mercedes use in their cars. One person even wnt as far as to tell me that some engine were produced at the GM plant and should stay away from those engines. He recomemended highly a straight v6 engine made in germany. How do i tell the difference.Do u guys have pic of what a straight 6 looks like versus a regular 6?
Thanks |
#2
|
|||
|
|||
Here's what one straight-6 looks like. That's the m103. The last straight-6 by MB was the m104 if I'm not mistaken.
Just means that the cylinders form a line (or an "I") instead of a "V" shape if you were to look at the engine from the front.
__________________
1990 190e 2.6 - The only one I can really call "My Car". 1987 190e 2.3 - The donor car's up and running, only mods are Euros and a Sony headunit. My Dad's runabout now. 1990 300e 2.6 - The parents' ride. |
#3
|
|||
|
|||
Thanks
Fast response, and what does the regular 6 look like. also why are some may mechanics downing the v8's?
|
#4
|
|||
|
|||
Maybe it is because the mechanic prefers to work on the inline 6 vs a V8. I feel the same way. The I6 in the 320 version was the M104, dual overhead cam and 4 valves per cylinder. This engine was the last of the inline 6 produced from a long line of 50 years of development, the 250, 280 engine, the 300 engine and then the 320. The inline configuration is a very smooth running engine and in it's latest versions produced over 220hp. The benefits of the engine is that the lower end never fails, the chain is shorter and is less likely to stretch and doesn't need replaced as often. The engine is easy to work and and a very solid engine.
Teh V6's are good engines as well, they changed the degree angle around to make it smoother and get rid of the balance issues, these engines are nice and smooth and fit better in the new cars with less space under the hood. But in a V configuration you have 2 chains, and 2 heads. Basically an inline engine has the block, and the head on top of it, all the cylinders are in line, in a row from front to back, in a V configuration you have the crank in the middle, the rods up to the pistons 3 pistons on one side and 3 on the other, then to get to the cams you need two chains and two heads on each bank of cylinders on each top of the V configuration, same with a V8 except you have 4 cylinders on each side. I hear a lot of good things about the 500 engine, I don't know a lot about the 420, just there don't seem to be a lot of those around. Check the forum out on the search function and buy what you want. If you want a V8 I would go for the 500, if a 6 cylinder, I would prefer the Inline 320 M104, but those were only until 96. After all it was an inline engine in the 300SL Good luck and happy benzing!
__________________
Brian W. Heitman www.MBCA.org/northtexas Join MBCA!!! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to Find an Honest Mechanic and Importance of MB Specialty | DJChillfit | Off-Topic Discussion | 26 | 02-04-2005 11:35 PM |
Insearch of local diesel mechanic | seafood54 | Diesel Discussion | 4 | 07-29-2003 08:12 AM |
350 SDL Injector Pump Damaged By Mechanic? | ezrider | Tech Help | 9 | 06-22-2002 08:27 AM |