|
|
|
#1
|
|||
|
|||
How to replace lifter and timing chain on 99 CLK430
Hi,
My name is Duong. I have a 99 CLK430. My lifter has noises in the morning and the dealer advised me to change them out (24). Is it hard to replace them? What's a good procedure to do so? Is it necessary to change the timing chain at the same time? While I'm there, is there anything else that make sense to replace at the time? Thanks for all the advices. Duong |
#2
|
|||
|
|||
How many miles are on this engine?
__________________
2007 C 230 Sport. |
#3
|
|||
|
|||
This car has 85000 on it.
|
#4
|
|||
|
|||
Quote:
Do a search on " lifter noise ", etc. There should be quite a bit of info archived on this topic. You'll find oil viscosity has a lot to do with lifternoise. Also a good flush may be in order. DO NOT do any serious mechanical work at this time !
__________________
2007 C 230 Sport. |
#5
|
|||
|
|||
Clk430 Lifter Noise
Tell us what oil you have been using. If it isn't Mobil 1 0W40 then change to that and drive it a few hundred miles. The noises may fade away. BTDT.
__________________
Roger E. |
#6
|
||||
|
||||
'flush' engine with 50% oil and 50% trany fluid (IDLE ONLY) for 5 min or so and use Mobil1 10-30w.
__________________
DRIVE IT LIKE YOU STOLE IT! |
#7
|
|||
|
|||
The Oil
Hi i think the proble is the oil like the other suggest you, this because i have the same car with 120.000 miles and i had some lift nois at start-up in the morning for 20 sec. I changed the oil and i put CASTROL TXT magnatec and the noise went away.
I think this will help you and hope you do not have to opend this engine before 250.000 miles... Alberto |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OM603 timing chain installation report | gsxr | Diesel Discussion | 3 | 08-15-2003 11:00 AM |
Timing Chain : Engine died | yben | Tech Help | 8 | 01-22-2003 10:52 AM |
Timechain, lifter | mb82 | Tech Help | 6 | 07-24-2002 08:18 PM |
Lost a Timing Chain while starting up | PKash | Tech Help | 7 | 06-06-2002 01:10 AM |
starting trouble - grinding noise | agupta | Tech Help | 11 | 07-11-2001 04:16 PM |