|
|
|
#1
|
|||
|
|||
1991 w124 fault code 13
My check engine light is lit and I get 13 flashes from the DTC LED. I just finished replacing the front timing cover and may have damaged the wire to the sensor that monitors the front crank pulley. I searched the forum and it looks like this may be the cam position sensor. I do not think this car has a cam sensor (1991 300E 2.6). The engine seems to run OK. I tried to reset the check engine light and it came back on. Do I have a bad sensor wire? What is fault code 13?
Al |
#2
|
|||
|
|||
Code 13 is fot the intake air temp sensor in the air filter!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ASR light / limp home / fault code 6 | deanyel | Tech Help | 41 | 12-18-2011 02:50 PM |
Check engine light-no fault code | sokoloff | Diesel Discussion | 0 | 01-27-2005 11:42 PM |
Fault code 4 - Intermittant | Antony | Tech Help | 2 | 07-01-2004 12:16 PM |
fault code 4 | nongsl | Tech Help | 3 | 09-17-2002 07:42 PM |
Will driving with fault code 26 on 94 E320 cause a problem? | neumann | Tech Help | 5 | 07-30-2002 06:15 PM |