|
|
|
|
|
#1
06-20-2005, 12:40 PM
|
|||
|
|||
|
Help Testing Temperature Sensor
I need to test the temperature sensor that is right above the thermostat in the 1974-450-SLC. The wire is missing that should go to the IC.. I am going to open the harness in several places and try to find the wire. It is supposed to be a green wire and their are no loose wires in the area. Their was a blue wire but the book shows the only blue wire going from the regulator to the IC...Any ideas will be appreciated...I want to test the sensor while I have that part removed from the car...I guess I can always reinstall the sensor and start the engine and run a wire to a IC temp guage......Jim
__________________
James A. Harris 
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| M103 Emission Test Insight | Duke2.6 | Tech Help | 5 | 06-10-2006 12:16 AM |
| Ambient Temperature sensor | casey10 | Tech Help | 4 | 07-31-2004 05:27 PM |
| Question about using air flow sensor plate for base line testing | Mike Richards | Tech Help | 2 | 03-14-2003 04:48 PM |
| Temperature sensor: Resistance vs Temps | Russo 85300tD | Diesel Discussion | 1 | 09-23-2002 06:41 PM |
| temperature sensor on '80 240D | Darrin | Diesel Discussion | 1 | 11-26-2001 04:35 PM |
Linear Mode
