1. I purchase an automotive meter, noting fancy like the Fluke 88 or 199. It has the basic features like V, A, Ohm, Dwell and RPM.

2. My question is how do I hook up this unit to read RPM or Dwell (to check lambda)? The meter manual advised to put - side to ground and + on the coil's - going to the distributor for both options and also to check vehicle manual. Well the coil in our cars do not hookup this way. My applications are 87 190E 2.3 and 88 260E (California).

3. I’m guessing it’s at X11 but which pins to what?


Thanks in advance,
Thai GI sends…

__________________
GI but not GI Joe
They call me "The Thai GI"
Thai in the US Arsenal