\'88 190E CHECK ENGINE LIGHT/Code Blink Read?

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
'88 190E CHECK ENGINE LIGHT/Code Blink Read?

02-10-2001, 03:20 PM

stevebfl

Moderator

Join Date: Mar 2000

Location: Gainesville FL

Posts: 6,844

You must have a California car as the mounted light only appeared on 93-95 Federal models.

Turn the key on engine OFF and depress the button for 2-4 seconds. The light will be lit as you press the button and go out as you release. The control unit will cause the light to blink out a fault code. One blink indicates no codes present. If there is more than one blink count them. This will be the first code. Repeat the code retrieval by again depressing the button and count the blinks. If you get the same number then there is only one code. Keep repeating till all codes are read. This is indicated by the repeat of the first code received.

__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E320 Check engine light	donwo	Tech Help	9	05-12-2004 05:35 PM
Check Engine Light 94 500sl	geno	Mercedes-Benz SL Discussion Forum	3	04-14-2004 08:02 AM
02 Sensor replace even if no check engine light?	imaginasian	Tech Help	4	08-14-2002 10:06 AM
190e horrible stalling/check engine light	moomoomeow	Tech Help	0	08-01-2002 03:53 PM
Check engine light S500 how to check codes	fenix	Tech Help	3	10-02-2001 12:53 AM

All times are GMT -4. The time now is 03:19 AM.