Good afternoon to all,
I have a situation that I know you guys can help on! I have a '95 C280 on my hands with a P1341 Camshaft control logic chain code. The car has come to us from another shop with other problems and all was resolved but this code. The oil is in good shape and after pulling the VC off to verify Cam timing, which is good, the cyl. appears to be in great shape with no sludge build up. Pulled off Cam adjuster and all is ok with that and magnet pulls normally. Verifyed grn signal from ECM to adjuster but cam does nothing! Verifyed operation of MAP sensor and had correct voltage decrease with vacuum increase. Which leaves me to believe that there is a problem with the Vanos itself. Has anyone run into these being a problem or did I forget something?? Thanks Alan