|
|
|
|
|
#1
09-27-2006, 08:24 PM
|
|||
|
|||
|
fuel distributor nightmare
i read some of the postings on fuel distributors that were listed, i noticed a few were old so i thought i'd try my luck. i have a 1979 450 sl with fairly low miles. the miles are low because it hasn't run right in a long time. four fuel distributors later, i'm in need of a rebuild kit. all the ones i have gotten from junk yards and on ebay used have one or more fuel outputs not functioning properly whether cast iron or aluminium. these rebuild kits have got to be available...i'm gonna try a boshe supplier this week. has anyone found out where to find a rebuild kit, or a way of making your own new diaphram? any help would be greatly appreciated...
|
|
#2
09-27-2006, 08:40 PM
|
||||
|
||||
|
Are you sure it's not a "stuck piston"
I had a fuel dis. problem on my 380 - couple wacks (taps...) with a hammer later and she ran good - REAL good.
__________________
-1983 VW Rabbit LS Diesel (5speed, VNT/Giles build)
|
|
#3
09-27-2006, 11:03 PM
|
|||
|
|||
|
I've dismantled a few K-jet fuel distributers from Saabs, to see why they weren't working as they should.
It's usually rust on the spacer plate, or in the fuel metering slots. As far as I am aware, there is no rebuild kits available for any of them. The castings are bolted to the spacer plate with no gaskets. The machined surfaces against the spacer plate seal when everything is both new and extremely clean, and somehow seal against it. I hate to say it, but I think you're in for a new one. Yea, I know that Bosch is damn proud of those things.
|
|
#4
09-28-2006, 12:52 PM
|
||||
|
||||
|
Rebuild kits are not available.. Those that do rebuild them are manufacturing the critical seals/gaskets which are NLA from MB.
Get yourself a CIS Flowtech (i've been using them for years) and call it a day.. Used FD's are a risky way to go IMHO. Jonathan
__________________
Blue Ridge Mercedes Jonathan Hodgman http://www.blueridgemb.com/ Enthusiast Service, Restoration & Tuning. Follow Us on Facebook! Located in the Atlanta area Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines. Mercedes Repair Atlanta
|
|
#5
09-28-2006, 03:49 PM
|
||||
|
||||
|
I have not found CIS Flowtech on the web. How do I contact them?
__________________
I got too many cars!! Insurance eats me alive. Dave 78 Corvette Stingray - 3k 82 242 Turbo Volvo - Manual - 270k 86 300e 5 speed manual - 210k 87 420sel - 240k 89 560sl - 78k 91 420sel - 205k 91 560sel - 85k 94 GMC Suburban - 90k 97 Harley Davidson Heritage Softail - 25k 00 GMC Silverado 1 ton 30k
|
|
#6
09-28-2006, 04:07 PM
|
||||
|
||||
|
that may be difficult, they don't deal w/ the public.
If you like I should be able to help, drop a line via blueridgemb@gmail.com Jonathan
__________________
Blue Ridge Mercedes Jonathan Hodgman http://www.blueridgemb.com/ Enthusiast Service, Restoration & Tuning. Follow Us on Facebook! Located in the Atlanta area Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines. Mercedes Repair Atlanta
|
|
#7
09-29-2006, 10:45 AM
|
|||
|
|||
|
fuel distrib
neither benz nor bosch has ever offered any parts for fuel distributors.btw the cast iron f.d. were replaced under warr way back in late 70's.
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg
|
 |
| Bookmarks |
|
|
Linear Mode
