|
|
|
|
|
#6
12-29-2006, 05:54 PM
|
||||
|
||||
|
Did you check to see if you have a "X11/21 LED+sw combo" in your car?? You should do that first. If it's there, then you can get codes from the Diag Module . . . and that's a start.
Certainly you can make one yourself or get one from the 'e-bay' link; that's basically what the LED+sw combo is except that you can get codes from all of the populated pins in the 38 pin connector. 
|
| Bookmarks |
|
|
Threaded Mode
