|
|
|
|
|
|
|
#1
05-27-2007, 06:54 PM
|
||||
|
||||
|
1995 E320-Check Engine-What Do 26 Flashes of the LED Mean?
After holding the button down for 3-4 seconds with the key in position 2 (dash lights on, engine off), I counted 26 flashes of the LED. I repeated the procedure and counted 26 flashes again. What does this code mean in respect to the emission control system? Thanks in advance!
By the way, what is the proper procedure for resetting the light?
__________________
1982 300D-T (sold) 1988 300E (sold) 1994 E320 Wagon (sold) 1995 E320 1998 E300D-T 1999 E3204M Wagon 2001 E320 2005 E320 CDI 
|
|
#2
05-27-2007, 06:58 PM
|
||||
|
||||
|
Quote:
after the last code is diplayed hold the button down for 8 seconds, after that cycle the key off and wait for 15 seconds, as for the code, send me your chassis number, i will see if i can look it up, looks like it may be
__________________
1967 250 S 1967 280SE 1968 250S 1971 280 SE 1973 220 1974 280 S 1975 450 SEL 1976 220 D 1979 300SD 1983 300 SD 1985 230 TE euro 1986 280SL 1986 500 SEL euro 1986 190E 2.3 1990 300 SE 2003 C230 K 2004 C230 K 1987 560SEL 1987 300SDL now in canada 2005 C230 1998 C43 AMG Sold to DON 1993 190E 2.6 300TD Former daily driver Totaled current: R320 CDI Ram 2500 Cummins Last edited by Carson357; 05-27-2007 at 08:21 PM.
|
|
#3
05-27-2007, 07:02 PM
|
||||
|
||||
|
Thanks
I accidently pulled the key out after reading the last code. Then, I put the key back in position 2 and held the button for 10-12 seconds. I removed the key and started the car. The check engine light was still illuminated. Now, I can no longer retrieve the 26 flashes. What does this mean? Also, does anyone have the list/PDF of all codes corresponding to flashes? Thanks.
__________________
1982 300D-T (sold) 1988 300E (sold) 1994 E320 Wagon (sold) 1995 E320 1998 E300D-T 1999 E3204M Wagon 2001 E320 2005 E320 CDI
|
|
#4
05-27-2007, 08:08 PM
|
|||
|
|||
|
Code 26 is the Infamous Shift Delay fault code.
Most likely problem is a leaking cable control element at the tranny for delayed shift when engine is at warm up condition. This is an emmissions code and the concept is to hold the trans in second gear delay to help speed the cat up to temp. Search archives for "Shift Delay'... I have a tutorial on the whole system in there somewhere. Here are codes for you car and instruction for a retrieve tool for all the other Management Modules http://www.peachparts.com/shopforum/showthread.php?t=107630
|
|
#5
05-27-2007, 08:12 PM
|
||||
|
||||
|
are you sure? i looked it up on startekinfo and got a code related to rear oxygen sensor, they show 34 and 35 related to the upshift delay, i referenced it using engine 104.992 in chassis 124.032
Quote:
__________________
1967 250 S 1967 280SE 1968 250S 1971 280 SE 1973 220 1974 280 S 1975 450 SEL 1976 220 D 1979 300SD 1983 300 SD 1985 230 TE euro 1986 280SL 1986 500 SEL euro 1986 190E 2.3 1990 300 SE 2003 C230 K 2004 C230 K 1987 560SEL 1987 300SDL now in canada 2005 C230 1998 C43 AMG Sold to DON 1993 190E 2.6 300TD Former daily driver Totaled current: R320 CDI Ram 2500 Cummins
|
|
#6
05-27-2007, 08:15 PM
|
|||
|
|||
|
I am Positive..
..and 124.032 does not even have after cat/downstream 02 sensors ,
|
 |
| Bookmarks |
|
|
Hybrid Mode
