I dont get it but im upgrading the discs and pads and i need to specify how many pins are in my rear caliper. I thought it was the pins the that protrude through the back of the caliper that presumably go through to hold the pad in place and if thats the case there's two but i dont know.

__________________
1997 Mercedes E320 Turbo
Garrett T3/60-1 Turbocharger
Custom Water Intercooler Setup
352rwhp/366rwtq @ 8.6psi in '08

http://img78.imageshack.us/img78/1051/log7smallay9.jpghttp://img66.imageshack.us/img66/740...s3smallox0.jpg

Check your chassis# against the production break-point..

http://catalog.peachparts.com/RenderScriptTemplate.epc?_cmd=epccat_VehicleAAA&cookieID=2FG17RJ3A2FO10PUSF&yearid=1997%40%401997&makeid=MB%40%40MB%40%40X&modelid=E%2D320%2D002%40%40E+320+Sedan&catid=N%40%40Brake&mode=PA&subcatid=N1040@@Brake+Caliper&source=www.peachparts.com&clientid=catalog.mercedesshop

__________________
A Dalton

wheres the chassis # located on the car?

__________________
1997 Mercedes E320 Turbo
Garrett T3/60-1 Turbocharger
Custom Water Intercooler Setup
352rwhp/366rwtq @ 8.6psi in '08

http://img78.imageshack.us/img78/1051/log7smallay9.jpghttp://img66.imageshack.us/img66/740...s3smallox0.jpg

Its the VIN number on the dash board near windshield. Just pull a rear wheel off and you will see either 1 pin or 2 pins protruding from the caliper, they almost look like a thick dull pencil point.

__________________
Dennis
2006 E320 CDI Black/Black Leather. Nav, HTD Seats HK stereo 32000 miles.
2000 VW Passat 1.8t 300,000 miles as of Dec 09, 2009 original owner
1997 E300d Silver 300,000 miles As of Jan 05, 2010
3rd owner SOLD

Well Jeanus,
Those #s are seen on the dash thru the windshield...VIN...serial#.

If you can't find that, then take a wheel off and look......

__________________
A Dalton

E300D

Sorry for the cross post..I was typing while you were sending.......

At least we had the same answer..............

__________________
A Dalton