specs-- and a question

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
specs-- and a question

11-01-2001, 08:19 AM

mbdoc

Moderator

Join Date: Mar 1999

Location: Tucker, Ga USA

Posts: 12,153

The spec is .003" to .0039". & the wear limit is .0078"(0.2mm).
The injector must have "seal" (heat shield) where it sits on the pre-chamber.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
S500 Front End Specs? Help!	OneBadViper	Tech Help	2	07-26-2003 04:19 PM
380SL Engine Specs Question	waltere	Tech Help	4	01-28-2003 07:29 AM
Brake Flush and rotor specs	Lewis	ML, GL, G-Wagen, R-Class, Unimog, Sprinter	4	01-17-2003 12:00 AM
Alignment specs on 300 TD	lrg	Mercedes-Benz Wheels & Tires	0	03-15-2002 01:19 PM
A not-yet answered question re: SportLine specs	mateoc	Mercedes-Benz Performance Paddock	2	12-08-1999 08:24 PM

All times are GMT -4. The time now is 09:23 PM.