Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-01-2001, 01:15 AM
Registered User
 
Join Date: Oct 2001
Location: washington state
Posts: 31
specs-- and a question

couldn't find this in a search
617-951 turbo diesel
what is the correct valve to guide clearance, Haynes says service limit is .0041... just got my head back from machine shop and I think the guy set my exhaust at .004. seems a tad sloppy. what do you all think
also this did not have the heat shields between the injector and the pre chamber--- is it supposed to?? (1982)
Reply With Quote
  #2  
Old 11-01-2001, 09:19 AM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The spec is .003" to .0039". & the wear limit is .0078"(0.2mm).
The injector must have "seal" (heat shield) where it sits on the pre-chamber.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #3  
Old 08-17-2002, 10:51 AM
Kent300D
Guest
 
Posts: n/a
JB,

Take a look at the tread currently running about the heat shields on my W115 76 300D (search under my User ID: Kent300D)...I suspect we ran into the same problem.

Good Luck,

Robert
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
S500 Front End Specs? Help! OneBadViper Tech Help 2 07-26-2003 05:19 PM
380SL Engine Specs Question waltere Tech Help 4 01-28-2003 08:29 AM
Brake Flush and rotor specs Lewis ML, GL, G-Wagen, R-Class, Unimog, Sprinter 4 01-17-2003 01:00 AM
Alignment specs on 300 TD lrg Wheels & Tires 0 03-15-2002 02:19 PM
A not-yet answered question re: SportLine specs mateoc Performance Paddock 2 12-08-1999 09:24 PM



All times are GMT -4. The time now is 07:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page