Picked up this wagon last week and in sorting it out have found several places where pieces look to be missing. If anyone can shed some light or has these pieces for sales, please reach out.

1. Plastic cover behind the battery over the ECU and other important parts. Jim has this piece but I'm wondering if there's any more there.

2. Inside bottom of tailgate. In the interior, Right in front of the latch loop on the body there looks like something should be screwed there. Would be 6 inches or so wide and maybe 1 or 2 tall. It would be on top of the carpet that lines the footwell for the 3rd seat.

3. Something to hold the spare wheel against the side of its compartment. Will fit through center hole of wheel and screw into the threaded hole in that piece of felt on the side.

4. Headlight locks/hood support. On either side of the radiator there are two holes into which something should fit that locks onto a plastic tab of the headlight assembly and probably also serves as some kind of support or bumper for the hood to rest upon.

1. There is a plastic cover over the ECU behind the battery, yes. It really is just a sort of contorted sheet of black plastic. Only other thing is on the top edge there is a rubber edging that sort of helps hold it to the inner firewall (you'll see a mirror-image of this strip behind the brake master cylinder). There is nothing really on the bottom to help is except 2 curved sections molded into the plastic, which sort or rest in or behind the battery tray.

2. Possibly this is a looped strap to assist in pulling down the hatch. I can't remember it's exact location. If you have no assist strap I'd say that's what's missing. I thought it was held on with 2 screws, nothing very high tech about it.

3. IIRC it is a large steel washer (larger than the central hole in the rim, so quite wide), and the bolt that passes through it I though was just bent at an angle, so just an "L" shape end. Passed through this big washer, through the rim, and into that threaded hole. May have been some padding on the washer on the rim side. It was made in some fashion that the bolt and washer would stay together.

4. Yeah a goofy-looking lock sort of thing. Doesn't support the hood at all, just holds the headlight steady. Of you look through the hole in the radiator support, there is a sort of C-shaped protrusion in there which is part of the headlight shell. And something in the middle of the C section, looks maybe like a tube?

Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)