|
|
|
#1
|
|||
|
|||
Help with HVAC/blower motor diagnostic
I have a 92 300E 2.6L with a 185K miles. Amazing condition, complete service history. When I got the car the ac was not getting cold. I took it in and had it charged and it was blowing very cold. I ran it for several straight days (I live in Phoenix) and it worked great. It did push ac air through the defroster vent which I am not sure if it is supposed to do that but..
Last night I got in the car and nothing. I drove for about five minutes and turned the ac back on and started working great again. Same thing this morning. Left the house works great. After my second stop, nothing. Still nothing. Checked the blower motor fuse and that isnt the issue. When I say nothing, I mean no blower. I do feel some cool air through the floor vent if the ac is in the on position and the car is moving but that is the only vent that has any flow. Any ideas? Thanks, Doug
__________________
1981 300TD 2005 C55 2004 E500 1999 ML430 1992 400E 1998 C43 2001 SL500 1988 300SEL 1986 190E 16V 1991 190E 2.6 |
#2
|
|||
|
|||
Swapped out the fuse and its working again now.
Thanks AD!!!! Doug
__________________
1981 300TD 2005 C55 2004 E500 1999 ML430 1992 400E 1998 C43 2001 SL500 1988 300SEL 1986 190E 16V 1991 190E 2.6 |
#3
|
||||
|
||||
Check the fuse for the blower motor. It is driver fender-side encased in a black cover. Just make sure that is intact...
Other than that, could be symptoms of a failing motor or regulator. Not too difficult to remove, just a little time consuming (2hours). EDIT: Looks like you beat me to it.
__________________
2016 Monsoon Gray Audi Allroad - 21k 2008 Black Mercedes E350 4Matic Sport - 131k 2014 Jeep Wranger Unlimited Sahara - 62k 2003 Gray Mercedes ML350 - 122k |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|