hi all,please would you help me on how to replace fenders on w124 coupe 1990,many thanx

fronts are held by many 10mm bolts, you will have to remove (pull) the lower panel to find the bottom bolts. There are some in the door jam, open the door all the way and you will see them. There is one in the bumper too but you shouldn't need to remove it. You will have to remove the side marker light and lower headlight panel.

__________________
'88 300TE, 175k, black RENNTech 3.6L Recaro C's AMG 1 SOLD
'92 500E, 110k, Spruce green, stock SOLD
'94 E320 Cabriolet, 130k, E500 wheels, Emerald green SOLD
'94 E320 Cabriolet, 110k, black, stock, SOLD
'88 300TE, 229k, dark grey, SOLD
'90 300CE, 212k, white, new paint, SOLD
'91 300E, 209k, white, rebuilt head SOLD
'74 914-6, grey, 2.7L 325hp twin turbo Audi conversion

I had to remove 1 hinge as i couldnt get all the fender bolts out from just the opening of the door, maybe a 1/4 inch drive with 8 inch extenstion might have made it I just undid 1 hinge to get easy access as I didnt want to scratch/gouge the paint.

1/4 drive with deep socket. hold the door max open and you can put tape on the fender edge if you're worried about scratching...

__________________
'88 300TE, 175k, black RENNTech 3.6L Recaro C's AMG 1 SOLD
'92 500E, 110k, Spruce green, stock SOLD
'94 E320 Cabriolet, 130k, E500 wheels, Emerald green SOLD
'94 E320 Cabriolet, 110k, black, stock, SOLD
'88 300TE, 229k, dark grey, SOLD
'90 300CE, 212k, white, new paint, SOLD
'91 300E, 209k, white, rebuilt head SOLD
'74 914-6, grey, 2.7L 325hp twin turbo Audi conversion

I couldnt get it to work thats why i undid 1 hinge, maybe the molding also and he wont have that.

I second the 1/4" drive socket. I have done 2 different front fenders on a 124, one for an '88 300E, and one for a '95 E300D. Was able to do both OK, but the '95 lower cladding makes it harder to reach that one bolt through the door gap.

Rgds,
Chris W.
'95 E300D, 322K

The door cladding is simple to remove, remove screw at door flange, pull out bottom with plastic barbs, move cladding away from hinge about 1/2" and pull away from the door. I understand the apprehension as a clip mount on the cladding occasionally breaks. Use slow even force.

__________________
'88 300TE, 175k, black RENNTech 3.6L Recaro C's AMG 1 SOLD
'92 500E, 110k, Spruce green, stock SOLD
'94 E320 Cabriolet, 130k, E500 wheels, Emerald green SOLD
'94 E320 Cabriolet, 110k, black, stock, SOLD
'88 300TE, 229k, dark grey, SOLD
'90 300CE, 212k, white, new paint, SOLD
'91 300E, 209k, white, rebuilt head SOLD
'74 914-6, grey, 2.7L 325hp twin turbo Audi conversion

you will likely break a clip or two

__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]