|
|
|
|
|
#1
08-30-2010, 10:24 AM
|
|||
|
|||
|
1989-420 No Reverse-Help
I have a friend that has a 1989-420 that has a reverse problem. All the forward gears work but not reverse. Sometimes it will go into reverse for a couple seconds. Any help will be appreciated... Jim
__________________
James A. Harris 
|
|
#2
08-30-2010, 12:10 PM
|
|||
|
|||
|
all the other 722.3 trannies wear out the reverse clutches before anything else why should this one be an exception.seriously though when it makes intermittent reverse connection is it solid or is trans slipping badly?
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg
|
|
#3
08-30-2010, 07:41 PM
|
|||
|
|||
|
The reverse is shot and the more you attempt to use it, the more damage that will be done to the trans.
__________________
 90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
