Quote:
Originally Posted by Mike D
+1 on that. The 30lbs is way too high. I foresee complications with the compensating valve at that pressure. Also a possible conflict with any anti-lock braking system if you have one.
|
Boy this is some sort of conflict, some of the post I have read say 30 psi and now the return comments are mutch less than I have read. I just orderd a Motive bleeder I hope this will fix the system! I am curios though, I built a pressure cap from the original master cylinder cap, and it leaks, is the one Motive has of thicker plastic?
12-01-2011, 11:38 AM
pressure bleeding
Threaded Mode
