|
|
|
#1
|
|||
|
|||
420SEL no power to blower motor
If I dont get power to the blower motor, and I have a good fuse, are we suspecting a bad pushbutton controller or could it be the electronic blower motor fan speed controller? 1989 420 sel
__________________
Andrew Villasenor 805-720-5057 1984 300D turbo 5-speed manual(daily driver) ALL MY DIESELS RUNNING WVO Everything is for sale for the right amount Ebay Store |
#2
|
||||
|
||||
fuse
there is a flat metal fuse under the hood some have broken and yet when you hit a bump it reconects making the unit run itermitently, or it burns out and you have no power. are you sure this is good?
|
#3
|
|||
|
|||
Could only be the fuse, the module or the blower. I just changed the module on my 300E. The blower was stuck, needed oil, and probably over heated the module and burnt it out. I bought a brand new one on Ebay for $75. Works great now. The module is located under the blower motor.
|
#4
|
||||
|
||||
No Power!
Just had this problem!
Thought it was a bad Climate Control Panel but it turned out to be a the electrical part of my ignition switch. Wires got too hot, melted my fuse holder and burned part of my ignition switch. Result: No power to the blower! New part solved the issue.
__________________
1989 300E 2005 Acura TL 2011 Hyundai Elantra Limited Swing hard! Take chances! |
Bookmarks |
|
|