There is something rattling inside the front right door panel of my daughter's 1989 300TE.

I really hate taking door panels apart, because I usually end up breaking some plastic tab.

Do any of you have a diagram, or step-by-step directions on how to take apart the right front door panel?

I also want to take the panel under the glove compartment apart. I want to install a CD changer in the glove compartment and I wan tto see what things look like around that area.

Does any one have a diagram of the area, or step-by-step directions on how to take the area apart?

Thanks.

__________________
Current Benzes

1989 300TE "Alice"
1990 300CE "Sam Spade"
1991 300CE "Beowulf" RIP (06.1991 - 10.10.2007)
1998 E320 "Orson"
2002 C320 Wagon "Molly Fox"

Res non semper sunt quae esse videntur

My Gallery

Not in this weather!

The glove box inner panel will pull out when you remove the plastic rivets from it.

__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS

Here's a step-by-step door panel removal explanation courtesy of member engatwork:

http://12.96.14.5/~engatwork/CkStrap.htm

As far as that rattle goes, I'd wager that it's a loose screw that holds on the wood trim from the inside. They loosen over time so be sure to check 'em.

Good luck!

~Paul

___________________
'91 300E, 208k miles