Hello
This morning as I was driving the engine reved up pulled over to the side. The car wont move D or R it makes grinding noise when I put it in Park and it rolls in park.No lights came on. What shoud I look for?
Thanks

__________________
1995 E320
1998 E320
1999 E320 4Matic
2000 E320 4Matic
2000 ML320
2007 C230 Sport
2003 Cadillac CTS

No one has replied, I'll take a crack at it..

Have you tried moving it from 2nd gear(winter)? Engine on?

My guess if you cannot move the car in neutral. Engine being off-it's your transfer case.

More than likely B2 planetary gears, or you had a torque converter failure, but most would say it is B2 as it is very common failure in Pre-2000 722.6 transmissions.

Martin

Your front driveshaft has failed.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff

Thanks for the info, it was to cold and snowing this morning to look under the car just called tow truck and took it home. After work jacked up the front and right front axle was popped out that O ring in front of the axle towards the differantial failed to hold it in place both front axles are new replaced them 3 months ago boots were torn on the originals, aftermarket ones $60 piece, so now just put the original one just swaped the boots all is good the car moves again. I'll do the other side over the weekend put the original one just swap the boots.

After doing some reading aftermarket axles are just JUNK .

Thanks

__________________
1995 E320
1998 E320
1999 E320 4Matic
2000 E320 4Matic
2000 ML320
2007 C230 Sport
2003 Cadillac CTS