Looking at the numbers on the sheet and comparing the starting values the adjusted values and the target values I get really irritated by adjustments that were made that end up not being within the target values...

...looking at the comments on the second sheet it seems like the mechanic gave up. It seems like he's had a look at the car decided that he doesn't like the rust - hasn't made a fuss about the vehicle not being level and then put it on the machine.

Interesting to see the measured toe with and with out the spreader bar though.

__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!