Quote:
Originally Posted by liquiddog
Check the o2 sensor, temp sensor, and airflow potentiometer if you haven't already. All are easy to test. Just got done with this same problem if you need explanations.
|
My Coolant temp sensor is off a little...at 90 degrees it Ohms out at 393. I believe target is 200 to 300 at that temp. Thats what I get for buying ebay no name sensors. New Bosch 02 sensor, new throttle plate and new fuel / air plate with potentiometer pre adjusted. Im going to test the pot switch just to make sure tomorrow. Loaner temp sensor, fuel pressure regulator and cold start valve on Friday.
I believe these are the correct ohms for the coolant temp sensor:
60c - 600
70c - 435
80c - 325
90c - 247 etc
Like I said mine is at 393.
06-04-2014, 05:56 PM
Threaded Mode
