93 190 e 2.6

[goldwinggary]

How do I reconnect the recerculation tube that goes from exhaust manifold egr valve over to the intake? I cannot get that dang fitting on the intake side, underneath, to start for nothin! Help!

[porkface]

loosen it at the egr, don't remove it. there's also a clamp at the back, i forget where. it's tough but it can be done. unless, it's been off before and bent. good luck, chuck.

[goldwinggary]

Can the car be run without the tube? Cap off the ends?

[porkface]

you have to plug the manifolds. otherwise, big vacuum leak and lotsa exhaust noise and it won't pass emissions. good luck, chuck.