You need to pull the seats, the center console, and the carpets. The module is under the rear seat. The harness goes from the left front kickpanel to under the rear seat then back to the center console switches and over to the right seat.

It is a lot of work but absolutely worth it.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff

That's what I needed to know!! Thank you!!! Going tomorrow and ripping all of that out of that car! I'll try and post pics of I can.

Also, is there a relay, or is the module the same thing?

__________________
76 MG Midget
78 Datsun 280Z
86 Peugeot 505
01 Subaru Outback

“Owning a car is like owning a dog. Every now and then, it craps on the carpet — but it’s still your dog.” - Jeremy Clarkson