|
|
|
#1
|
|||
|
|||
W123 M102 sump removal question
Hello everyone. Just a quick question. I need to remove the sump in my 1983 W123 with M102 engine and manual gearbox. I just would like to know if any of you have done this job before and is it really necessary to remove the engine like the manual says or can I just loosen the engine mountings etc and lift the engine a bit with an engine hoist to get it out? I have done this job before on a 190E by only lifting the engine, it was a difficult job but I got the pan out and back in again eventually. I'm not so sure if the same procedure will work with the W123 as well? Can it also be done this way?
Any help or info will be much appreciated. Thanks |
#2
|
||||
|
||||
Quote:
W123 M102 oil pan removal question - Mercedes-Benz Forum On your other thread on the other side
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#3
|
|||
|
|||
Quote:
|
Bookmarks |
|
|