I thought it might have been broken. Can you give me the details of how you aligned it?

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k

When I removed the round plug the D pin came broken from the cluster.
I then glued it to the connector in the same location according the the mark left on connector.
I then plugged it on the cluster. As it didn't not worked, latter I removed it from the cluster again and the D pin wasn't there again. Then my only chance was to plug it aligning the pins using as guide two pins that are spaced differently than others.
These two holes in the connector match with the two pins on the cluster. With power off I tried and the connector will go into the pins only if these two pins and holes are aligned. There are no other way to plug connector and cluster pins if these two holes and pins are not matching one with other. This is the way that I installed the cluster in place after the first time when I had trouble.
I really don't know why other parts of the car like radio, fuel and temperature gauge are not working after the first time.
I need help and I am willing to give all necessary details of the problem as I gave today.
Thanks

__________________
Nyck - TX - USA