W124 Rear control arm bushing

[ps2cho]

Hey guys,

So I am replacing my inner rear control arm bushing. I unfortunately have mangled one in my press. It was going in straight, but the outer metal just ended up bending out.
I was using a 1" socket and its an identical size....I think the metals just very thin on that bushing.

Has anybody else replaced this bushing and can tell me any tips or how you did it?

(This is NOT the carrier arm bushing, its the INSIDE bushing of the lower control arm -- its the "Trailing Arm bushing" 202-352-00-65)

Thanks,