I just did an extensive search for the cause of these codes and couldn't find anyone who has experienced this. The car starts and drives as well as it always has - no problems. This morning though, immediately upon startup, the CEL illuminated. Pin 8 yields codes 25 & 33. I know what they mean, I don't know what's causing them. One of the codes is the camshaft position sensor and the other is that the timing is retarded to its limit. I replaced both the smaller and larger camshaft position sensors last year. What's at fault here?

__________________
Remember, Bad Decisions Make For Good Stories

I cleared the codes at pins 8 & 14. In fact when I try to read a code on both pins 8 & 14, I get no codes stored/1 flash. The second I start the engine, though the CEL illuminates. I turn the engine off, turn back to position II, read the codes on 8 & 14, no codes stored. Has anyone else had this happen to them?

__________________
Remember, Bad Decisions Make For Good Stories