Quote:
Originally Posted by duxthe1
If the cams aren't timed and you cant turn the engine then you are binding on the valves. Attempting to continue turning will bend valves.
If you can turn the engine to 40 degrees BTDC you should be able to move the cams until they are close, then go to TDC and time the engine.
|
i was assuming everything was still together but you may be on to something......i wonder where he is exactly in the "process".......
__________________
0o==o0
James 4:8
"...let us put aside the blindness of mind of those who can conceive of nothing higher than what is known through the senses"
-Saint Gregory Palamas, ---Discourse on the Holy Transfiguration of Our Lord God and Savior Jesus Christ
Centrally located in North East Central Pa.
|
05-09-2017, 01:03 AM
Threaded Mode
