06 E350 Not Shifting - Page 2 - PeachParts Mercedes-Benz Forum

l_turn9 · #16 12-21-2018, 06:45 AM

Quote:

Originally Posted by ILUVMILS

Yes, I'm referring to the shifter assembly and yes, there is mechanical linkage. Also referred to as the ESM ( Electronic Shift Module ) it works both mechanically and electronically.

The fact that the gear display in the instrument cluster is blank is the key factor.........

It sounds like this could be the source of my problems as well as the connector plate. Watched a youtube showing R&R of connector plate and while it won't be easy for me with my bad leg, it's do-able.

Will have to do more research on the shifter and find someone with a code reader....

Thanks gang - really appreciate your comments and suggestions.

l_turn9 · #17 12-26-2018, 07:22 AM

Should I still find someone to read the codes or is the C/S missing from the Odometer display enough to make you confident it's the ECM?
Thank you!

ILUVMILS · #18 12-26-2018, 11:53 AM

ALWAYS read codes before performing ant expensive and/or time consuming repair. A dealer or indy equipped with an SDS wouls be the way to go.

l_turn9 · #19 01-25-2019, 04:13 PM

Thanks, getting close to having the codes read - called Ammco & was told they have the reader that reads back to MB's made from around 2000 until now. I'm going to make payment ($50) dependent on getting a code and log to tell me what the problem is. thx for the help!