|
|
|
#16
|
|||
|
|||
Torrance, I have an extra 104 that I bought used just for the covers and such as I was going to build a c 36 motor from scratch, I eventually found
a good c 36 motor at a low cost, ill gather everything up tomorrow afternoon then ill pm you for address etc, back in the day we used to do headgaskets on 104 engines 2-3 a week, just hand lap the valve install a new seal should be ok,exhaust valve or intake needed? |
#17
|
|||
|
|||
Shop said 2 bent intake valves on number 6.
__________________
1993 e300 1995 e320 1994 e320 2006 s500 4matic 2004 Jeep wj overland 2001 Ducati 748 2004 Honda shadow aero |
#18
|
|||
|
|||
might be related to the other thread you made where you mentioned the cams were off time.
__________________
2012 BMW X5 (Beef + Granite suspension model) 1995 E300D - The original humming machine (consumed by Flood 2017) 2000 E320 - The evolution (consumed by flood 2017) |
#19
|
|||
|
|||
New valves .. put everything together again. Started up nice and quiet but has a miss. Gotta track that down now.
__________________
1993 e300 1995 e320 1994 e320 2006 s500 4matic 2004 Jeep wj overland 2001 Ducati 748 2004 Honda shadow aero |
#20
|
|||
|
|||
Bad coil pack. Replaced and it runs beautifully with no leaks. Thank you everyone for helping me out
__________________
1993 e300 1995 e320 1994 e320 2006 s500 4matic 2004 Jeep wj overland 2001 Ducati 748 2004 Honda shadow aero |
Bookmarks |
|
|