W124 Trunk lid Triangle mounting
 

I was able to locate the W124 emergency triangle and bracket that attaches to the W124 trunk lid.

However, I can't figure how to install the bracket.

Please advise. Pictures would help as well.

Thanks,
:-) neil
1988 360TE AMG
1993 500E

Did you ever figure out how to install it? I've been thinking about it..where did you find the bracket and triangle?

Neil, I am going to take you a picture tomorrow morning.

Omegabenz,

Where did you get the triangle and bracket?

if, in keeping with the general MB philosophy of making parts as universal as possible between model lines, the system is the same as the W201, and i have little reason to believe that it would be different, the feet of the triangle will slip into two holes at the bottom (front edge) of the trunk lid and the plastic bracket that retains the top of the triangle will slip into the holes at the top (back end) of the lid and slide to one side to lock into place.

if your W124 trunk lid has a lining,as in the 500E/E500, you will have to remove the lining to see the mounting. in order to use the triagle, you will have to either cut out the moulded triangular section of the lining or omit the lining altogether.

hope this helps.

Its a Euro car
 

Its a euro car thats why it has it.

Another
 

another

here
 

here

oooohhh...i need to get the euro triagle. i've got the north american one. it's got a big hole in the centre. :rolleyes:

Emergency Triangle
 

The part# I got from the Parts Shop is:

140-590-0212 for the triangle
140-890-0014 for the bracket

What I need to know is ...
What do I do with the trunk lid lining to make this work?

Moraine,

I just ordered mine. The dealer said it is for Mexico use only?????...I will check amd see...take pics and post. Thanks for the help guys.

moraine

re: the north american safety triangle: we don't have the white field with the vertical bar, just the reflective frame

AUF can also mean open or out. it all depends on the context

Moraine...where are you located in CA. I just moved from there (Bay Area) to WA.

Re: here
 

Hi,
How do you install the triangle and bracket if mine has a liner in the trunk? Any suggestions?

Thanks

you have to either:

1) remove the liner and cut out a portion of it to allow for access to the triangle and then reinstall the modified liner and THEN mount the triangle. or

2) remove the liner altogether and leave it out prior to mounting the triangle.