I have a 1990 300e and I removed the windshield wiper replaced the wiper blade and now I can't get the wiper back on the wiper attachment, please advise.

THanks,
PAUL

Did you get the whole blade as a replacement or just a refill?? I prefer to get the whole blade, not ever having much luck with the cheapo refills. I know for a fact that WalMart blades are SUPPOSED to fit but they don't. I had to go to NAPA to get the "proper" ones. The hook on the wiper arm fits over a pin on the blade and then has a locking device that snaps into place to hold it from moving and falling off. Hope this helps.

__________________
1991 300SE (my ride, 279,000 miles, looks almost new
1954 Cadillac (21 yo son's car, he bought when age 15)
1972 SeaBird 19 ft runabout (old but solid, slant six, Volvo sterndrive perfect condition, undergoing complete overhaul and refit)
1998 Toyota Rav4 (my sons daily driver when he is in the Continental US, PROUDLY serving in US Navy)

The process is counterintuitive. I took mine off my 85td without paying much attention and it took me about 10 minutes to figure out how to get the new one back on. Put the metal arm thru the slot and then slide the wiper blade back is about the most meaningful advice I can give. Or, find another car and look at it.

__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13