Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-23-2004, 04:27 PM
Registered User
 
Join Date: Mar 2004
Location: Philly
Posts: 127
w126 driver's door window operator

My new mint 1986 300sdl had it's first problem today. The drivers window made a thud starting down and two thuds when closing. I took off the door panel and discovered that the metal had fatigued and cracked in the door that holds one of the bolts for the window operator. I also found a deformed piece of white plastic. Apparently the metal bracket is sandwiched between two white plastic bushings on a metal sleeve. The bolt then passes through this assembly and the metal door frame. I think I have it figured out but can anyone post or email me a diagram of how all this goes together? I'll cobble it back together and not use the window until I can get new bushings. I'm also a little concerned about the fatigued and cracked metal in the door. I may need to mig in a little flange to give it strength. Hard to imagine how this happened.
Thanks
Dave

__________________
1986 300SDL
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page