Hey guys,

Well, it looks like we may have found the cause of the limp home issue on my 1997 E320. Trans fluid was wicked up through the wiring harness and into the ETC. There is quite a bit of fluid in the computer (1-2 ounces).

I have a few questions:

Does anyone happen to know the part number for the new adapter at the trans that was redesigned? My indie doesn't know nor does Phil and Fastlane. Indie tells me that they usually just replace o-rings. I did a search but came up empty.

What are the chances that this ETC isn't ruined after being soaked in trans fluid? I am going to have them attempt to clean with elctric parts cleaner and reinstall.

Finally, I know that the ETC is VIN specific and programmable via the HHT. But, if I get a used one from Ebay that is already coded can it be reporogrammed?

Thanks so much!!

Brian