![]() |
|
|
|
#1
|
||||
|
||||
center console removal on 240D 4 spd.
Hello all. I have to replace the plastic bracket that holds the three heat control switches. (heat contral left, center blower and heat control right). I've used the book to find the screws and have the console loose, but I think there is something I missed as it won't budge.
I removed the rear central console screw, two cap screws on either side of the drive shaft tunnel, and the the two screws in the foot wells on either side of the console. for good measure, I took out the passenger lower (below glove box) cover. It just doesn't want to budge!! Any help would be appreciated and thaks to all.
__________________
71 220D 169K wrecked 83 240D 118K sweet 4 speed 91 350SDL (one of the 60% good engines) 156K 84 300d (loaner to my sister) 189K 79 300SD (partswagen) 86 420SEL partswagen 70 220d (partswagen) 68 280s GASSER!!! under construction now 85 300sd 310K miles winter beater car retired 93 300d 2.5 turbo 168K wife's car 83 280SL euro 5 speed 155K 69 250S newest project 54K |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|