Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-07-2005, 05:12 PM
Registered User
 
Join Date: Apr 2005
Posts: 41
Do 1982 300Ds have rack damper screws?

Cause I cant find it in my haynes manual.



the problem im having is that it idles rough when warm. like shakes. my mechanic said its probably the fuel or the injectors so hes having me run redline 85 through it for a while to see if it clears up. The rough idle starts after its been driving a while and while stopped will go away if I put the car in neutral. and yes I did a search and found tons of stuff thats why im asking about the rack damper screw. I want to eliminate any and all culprits!



edit: it also goes away if I give it a tiny bit of gas. When the car is accelerating its super smooth.
Reply With Quote
  #2  
Old 04-07-2005, 05:17 PM
Registered User
 
Join Date: Sep 2004
Posts: 8,971
Yes, the '82 has a rack damper. It is at the rear of the injection pump, just forward of the oil filter housing. Looks like a bolt with a locknut. Adjusting it can do wonders for a rough idle.
Reply With Quote
  #3  
Old 04-07-2005, 05:27 PM
Registered User
 
Join Date: Apr 2005
Posts: 41
is there an online guide on how to install and adjust one? maybe a diagram?
Reply With Quote
  #4  
Old 04-07-2005, 05:40 PM
rg2098's Avatar
Detailing Moderator
 
Join Date: Jun 2004
Location: Rochester Hills, MI
Posts: 2,415
Quote:
Originally Posted by Actvs Dei
is there an online guide on how to install and adjust one? maybe a diagram?
Here you go.

http://engine.articles.mbz.org/diesel/rackbolt/
__________________
Adam Lumsden
(83) 300D
Vice-President of the MBCA International Stars Section
Reply With Quote
  #5  
Old 04-07-2005, 05:46 PM
Registered User
 
Join Date: Sep 2004
Posts: 8,971
To install a new one, just loosen the lock nut and unscrew the pin. You will have to angle it a bit due to the limited clearance between the pump and oil filter housing. When you install the new pin, stop when you feel the pin make contact, then adjust from there.
Here is what the 617 engine service manual has to say about adjustment:
"Loosen the counter nut. Adjust damper at idle speed, screwing damper in until transverse engine vibrations have been remedied. Then tighten counter nut to 20-25 Nm."
My personal experience suggests that better results are obtained with the engine at operating temperature, idling in "drive." If the pin is screwed in too much, the engine will be hard to start. So screw it in just enough to minimize the vibration, then stop.
Reply With Quote
  #6  
Old 04-07-2005, 07:19 PM
boneheaddoctor's Avatar
Senior Benz fanatic
 
Join Date: May 2004
Location: Hells half acre (Great Falls, Virginia)
Posts: 16,007
I need to do mine....It idles smooth as silk in neutral...but shakes like a SOB in drive at idle....
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
Reply With Quote
  #7  
Old 04-07-2005, 09:12 PM
Registered User
 
Join Date: Apr 2005
Posts: 41
ok guys where the best place to buy one?
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rack damper bolt adjustment question and cold idle problem... lietuviai Diesel Discussion 22 12-22-2003 07:46 AM
603.961 rack damper bolt? sixto Diesel Discussion 0 01-16-2003 10:33 PM
240D rough idle - Do I or don't I have rack damper bolt? JohnnyJ Diesel Discussion 8 10-08-2002 08:44 PM
rack damper pin - fuel shut off relationship? deluvak Diesel Discussion 2 08-20-2002 09:33 PM
new rack damper bolt 79 300 SD wgrr Tech Help 1 09-23-2000 07:01 PM



All times are GMT -4. The time now is 08:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page