Hey all.

Before I forget, this is for an 83 300D

Cleaing injectors for a friend and I realized something midway through - I don't have the torque specs for the injectors. I need both the torque for the injectors themselves (screwing top half into bottom) and also the torque specs for putting them back into head. The other thing that would be of great help is the opening pressure for these injectors. The bodies ( kca30s35) say 115 bar on them, but that seems rather low. I keep reading on here that it is in the 135 range...what gives? I tested a couple and they were from 120-140. I know - they should be matched. The nozzles are dn0sd240's if that info is relevant.

Thanks in advance for any help.
-Tony O