Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-19-2005, 01:18 AM
Rick & Connie
Guest
 
Posts: n/a
Can a 220D be bored for 240D sleeves?

I am wondering if the 220D's block is thick enough to safely do this.I would like to keep my 68' mostly origional.But after hearing about the common tendancy for excessive cylinder wear in the 220D engines,I was wondering what would be the best repair or replacement option.How interchangable are parts between a 220D and a 240D?Could I use a sleeved 240D engine block with my 220D crankshaft and keep it to the origional 2,2L?

Reply With Quote
  #2  
Old 08-19-2005, 08:34 AM
t walgamuth's Avatar
dieselarchitect
 
Join Date: Apr 2005
Location: Lafayette Indiana
Posts: 38,043
i dont know the

answer to your question, but i believe that if that is not possible you should be able to get sleeves to bore, sleeve and go back with stock pistons.

i would nt be surprised if you can bore and use the 240 pistons. according to my mb buyers guide, the stroke is the same and only the bore differs. i think most other parts are the same as well when comparing the early 240s. later after 80 or so there is a different setup on the ac mounting. that may affect the block casting i am not sure. the cranks and such are the same for all 240s i believe. and the 300 non turbos use all the same parts except block crank cam and oil pump... there are prob others but these are the major.

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
'69 220D engine swap ? Urquattro Diesel Discussion 6 06-26-2005 11:07 PM
Wanted: OM636, or 220D motor, mech sound dozer Mercedes-Benz Used Parts For Sale & Wanted 0 05-11-2004 12:59 AM
Can a 220D transmission manual replace an 83 240 D transmission manual? Carrameow Diesel Discussion 0 10-09-2003 03:22 PM
240D rings, sleeves; switching engines 300D Zane Reese Diesel Discussion 3 12-02-2002 09:57 AM
1972 220D Questions Lance Allison Diesel Discussion 2 04-08-2002 07:28 PM



All times are GMT -4. The time now is 11:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page