Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #16  
Old 09-13-2005, 10:57 PM
whunter's Avatar
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,432
Smile Relax, this is not personal.

Quote:
Originally Posted by duxthe1
Has anyone bothered to point out that the EGR on diesels actually helps lower the combustion temperature and the exhaust gas temperature.
As for the gunking of the intake manifold, EGR isn't the culprit there either. The gunk deposited in the intake manifold is from the crankcase vent. Volatile hydrocarbons from the crankcase are vented before the turbo. They get very hot after the turbo and the lighter components evaporate leaving the heavier components behind to form the gunk. Since the EGR valve is even hotter than the turbo a lot of gunk gets deposited there as the more volatile stuff evaporates. Think about it, what does the inside of the diesels exhaust pipe look like or for that matter the hot side of the egr valve. It's only a thin dry film of carbon. IF the EGR was the cause of deposits those would also be a thin dry film, and not the thick gooey gunk that clogs diesel intakes.

Sorry for the rant but as a responsible hot rodder I get miffed at people who automatically assume that disabling emissions equipment is the only way to make power. Don't even get me started about all of the wanna be racers removing the catalyst from their 16 second car to make it a 15 and 3/4 second car. I've built several fast street cars and make it a point to keep emissions related equip. in tact. That way when hot rodding is regulated out of existence I'm gonna be the one pointing at you.
The engine was designed and engineered to run without the EGR.
I have opened 150K mile MB diesel intakes, found ten millimeters of soot sludge coating the inside, and the engines did not have blow by issues.
EGR was added to the OM617 only as an after thought to meet USA emission demand.
Oil from the crankcase vent tube flows through fairly clean, when soot is added it becomes a thick sludge that builds up and effects engine performance.
Many of us do not care about the emissions because we run vegetable oil for fuel = emission is not applicable.

Note:
These cars do not, and never did have a catalytic converter...
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 CLK 430 with 56000 miles, good idea to buy? bigchingan1 Featured Cars 3 06-17-2004 03:01 PM
JB weld on center muffler... good idea or not? Snibble Tech Help 7 05-25-2004 01:22 PM
topsider, a good idea?? Davidtoo Tech Help 26 11-09-2000 06:33 AM



All times are GMT -4. The time now is 01:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page