i just cleaned by banjo bolts i used some biodiesel i had and wd-40 to blow the crap out.. and some toothpicks to clean the inside of the bolts.

i put them back on and just took it up the street a lil and back to see any dif

i alread adjusted my alda so thats 2/3 things i needed to do the third is adjust the wastegate

where should i see improvement i didnt get out of 2nd gear so i doubt anything happened.. should i go down the street in S and rev it to 4k for 5 secs to see how much smoke comes out and adjust from there?

also the back of my engine block is caked with oily crud from 20 years of use.. can i juse use some of the simply green or w/e its called and wash it off.. i dont know if the rear main seal is leaking but id like a clean engine to check for oil leaks