|
|
|
#1
|
||||
|
||||
87 300tdt oil cooler lines
found a large spot of oil under the left front fender this morn.looks like a rusted fitting on one of my oil cooler lines where it attaches to the oil cooler.price quote from dealership=outrageous.does anyone know where i might get a good set used.the local hydraulic hose shop says he can crimp a good set of used fittings on to new hose but cannot source the fittings new.has anyone here been down this ole lonesome road?
|
#2
|
|||
|
|||
Quote:
For me, I'm not going to get excited about it, as long as the drips don't get more frequent......... |
#3
|
||||
|
||||
Yeah I have been down this road when I first got my car. The fittings look pretty standard, I'd pull the cooler and bring it in to the shop. You should be able to find some that work.
I however needed the car quickly and didn't have time to mess with it so I ordered new lines from Phil. BusyBenz just remember to keep an eye on the oil pressure guage, they do blow if the crimp gives way.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#4
|
||||
|
||||
im worried about this getting serious very quickly.its more like a small puddle.the metal tube is visibly oozing oil with the engine running.when it break=total oil loss.this fact alone may justify the$500 cdn replacement cost but ill try for the alternate solution first.
|
#5
|
|||
|
|||
Quote:
|
#6
|
||||
|
||||
A6200-81381 Oil Cooler Hose IN STOCK $405.72
Pricey for the W124, ouch. The W126 was $50 less...
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#7
|
||||
|
||||
yep that $407.52 translate into about $500 canadian by the time you add exchange,shipping taxes.outrageous for what it is.but your caught by the short and curlies on this one.the local hydraulic dude made a power steering hose up for me for 78 450 sel under similar scenario.but the metal fittings must be good.im willing to buy a used set even with blown rubber hoses.
|
#8
|
|||
|
|||
PRICE ALERT.
I installed new oil lines on my 115/300d for about $10 and they are as good as original. If your fittings are good DON'T buy new ones. They can be very pricey and often difficult to find. To make the hoses first mark the way the fittings face on each hose. Twisting hydraulic hose is difficult. First grind off the crimp collar that holds the hose to the fitting. I removed mine by cutting it off with a hand grinder. You can do the same with a bench grinder. Once the collars are off and the fittings free take the 4 fittings and the 2 hoses to a hydraulic repair shop or a parts store that makes hydraulic lines. They can usually cut new lines and recrimp the fittings while you wait. Be sure that the shop gets the fittings facing the right direction. |
#9
|
||||
|
||||
W124 oil cooler hose replacement as PM?
One of my thoughts that have come out of some recent forum discussions of oil pressure alarms is what the cause of an oil pressure failure might be. Certainly one possibility is the pair of metal/rubber hoses that lead from the oil filter housing to the oil cooler. Mine are not leaking or damaged and the rubber has not yet turned hard but I'm wondering if the hoses should be replaced as preventive maintenance. Hose failure would dump the engine's oil onto the road and you wouldn't have much time to catch it and shut off the engine before irreversible damage was done. At least the low point on the hoses is clear of the belly pan, so any leaks would run down and make a drip spot where I park the car.
This is not a simple decision: Phil's price at the moment is $473.22 for part number W0133-1715552 "Oil Cooler Hose" (set of two) plus (2) part number 012 997 56 48 "seal rings." Another option would be to have a hydraulic shop put new rubber on the existing metal fittings. That puts the car down for a few days but would save a lot of money. The third option is to continue keeping an eye out for leaks and otherwise do nothing. What have you done? Jeremy
__________________
"Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 |
#10
|
|||
|
|||
Don't mess around with the oil lines, just order the OEM replacements. If you lose an oil line you are likely to lose the engine. It's not worth playing around with aftermarket, used, or homemade lines.
|
#11
|
|||
|
|||
Jeremy I thought that was a misprint. $473.22 . are they gold plated?
I had to look it up, Dang, you are right. then I looked up my 85 300D. $178.81 for the two. There is nothing special about MB hoses. just two bent pipes with a rubber hose crimped on the ends. I had mine made at a hydraulic hose shop. I used my Dremel with a cut off wheel. made a cut down both sides of the crimp, pried it off and pulled off the old hose. took the 2 bent pipes and the 2 off the oil cooler to the Hose Shop, and they welded on hydraulic fittings, and made new hoses with Parker Push Lock Hose and fittings. These hoses had been on with the old engine, and now 22xxx miles with the new engine. I don`t feel this is a hack job in any way, the hack job is the price for new one`s. I have had a lot of hoses made from this shop for Road Graders, Back Hoes, Dump Trucks etc.... and the hydraulic systems on these are a lot higher pressure than the MB oil system. when I changed mine the first time, the date on the crimp was 1984. so they had been on for 20 yrs. now that is pushing it. the rubber was hard as a rock. they should be changed probably at 10 yr entervals to be on the safe side. I`ll post a couple pictures if interested. Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
#12
|
|||
|
|||
Well, my indy refuses to use aftermarket hoses ever since he had to buy one of his customers a replacement engine. That's enough for me to use nothing but OEM replacements for this service. As I recall they were less than $500, cheaper than a single (dealer only) AC hose I had to buy for the 240D a few years ago. Personally, it's not worth my time to have them fabricated if I can get them from the dealer with a phone call.
I agree they need to be replaced at some interval. I replaced the original hoses when I bought the 300D in 2001, and replaced the hoses and the oil cooler (both OEM) when I replaced the engine about a year ago. It's still cheap insurance. |
#13
|
|||
|
|||
Get those lines repaired by a competent hydraulic hose shop- they will be better than the OE replacements. I have an excavator (3 cyl Yanmar diesel!) that burst a line that was constantly flexing. The burst strength of the new hose is 3500 psi-I don't care how good your oil pump is-you won't pop those. Many of these shops have a hand held crimper for A/C lines- mine were repaired on the car. Cost 200.00 complete.
|
#14
|
|||
|
|||
Quote:
|
#15
|
||||
|
||||
I don't get it either, ... in a different way.
Mercedes hoses are crimped Locally produced hoses are crimped Mercedes hoses are rubber/hydraulic hoses Locally produced hoses are rubber/hydraulic hoses I have hydraulic hoses made locally for boats and equipment, the cost of replacing one CAT C-12 in the belly of the boat is more than my car was when new, I don't skimp on hoses or any other part. Properly made hoses are worth the trip to a local hydraulic shop, and I trust them more than the purchasing agent at Mercedes-Benz USA. Oh, and I've been a supplier to Mercedes-Benz as well as most of the major automakers of the world, suppliers screw up too. The only difference is, if the Mercedes-Benz original hose fails new, you MIGHT have a claim that Mercedes will honor, ... might.
__________________
Gone to the dark side - Jeff |
Bookmarks |
|
|