Quote:
Originally Posted by Brian Carlton
You've got the two methods confused.
The quick method, using the tower marks, should have the reading at 0 degrees on the crankshaft damper when the marks are perfectly aligned. This is not easy to do.......the mark must be right in the middle of the notch.........if you pass it slightly, you cannot reverse it and get the proper reading.........you must go around twice and try it again.
The "proper" method, using the two millimeter valve lift, uses the specification of 11 degrees ATDC with a used chain on the crank pulley.
Presumably, if you're 5 degrees late with the quick method, the "proper" method will read 16 ATDC on the crank pulley. However, rarely do the two methods agree exactly. The proper method is more accurate.
There are Woodruff keys available for crankshaft readings of 4, 6.5, 8, and 10 degrees ATDC.
|
Thanks. for clearing that up!
So if I'm out 5 degrees, do I go with the 4 or 6 degree key? how many degrees does it take to effect cold weather starting and power?
BTW I called the local dealer for a Key and there is none in stock! in the city, but it can be ordered from Germany and will take at least a week, they were 10$ (I think I'll order a 4 and 6)
11-19-2006, 01:44 AM
Threaded Mode
