Quote:
Originally Posted by thorsen
300ma or 300milliseconds? 300ma is not enough juice to run the pump an 300milliseconds in not long enough to unlock all the actuators. On my 300Sd it took 2-3 seconds to lock/unlock all the elements.
The kit I bought from AZ had a dip switch to select 300ms or 3 seconds. You may want to check yours to see if there is a similar setting.
The wiring diagram above will help with the 300ma problem.
|
300ma signal -- enough to activate the relays. Not sure of the duration. I'll check for the dip switches. If there's a switch, it's inside the case and isn't talked about in the instructions.
11-29-2006, 08:32 AM
Threaded Mode
