| 
				 1999 300td boost sending unit not working CEL on 
 
			
			Engine light was on code said super boost curcuit A malfuction. I played around with the little switch on drivers fender well tha has line from above egr going to it removed line and put on a gauge to make sure I was gettig boost a quick blip of the throttle gave me 4 psi put line back on tapped on switch  wiggled wires code cleared drove car and light stayed off .Any one know if that was the correct switch that I was messing with or did I just get lucky. under hood diagram calls it  "MAP" sensor.
			
				
			
		 
				__________________   
89 Ford F3504x4CC 7.3 IDI turboed Intercooler and running on wvo now powered by a 1997 Cumins 
87 300SDL on bio and wvo killed by chevy truck 5-24-06 
1999 E300TD black with gray int.
			 |